Sewage pumps with mechanical stirring mechanism (Picture1)
For clearing sand traps and sludge ponds and for stirring up deposits. The mechanical mixer is attached to a vortex impeller.

Sewage pumps with cutting mechanism (Picture2)
For pressure drainage of with long discharge pipelines possessing small cross sections. The cutting system before the impeller disintegrates sewage constituents to the required size.
Rotor made of Abrasit.

Sewage pumps of stainless steel (Picture3)
for pumping corrosive media. All parts coming into contact with the media are therefore made of V 4 A stainless steel. With cable protection hose and elastomeres of Viton as a standard.

Sewage pump with ceramic coating Ceram C0 (Picture4)
Applied in airless procedure. For interior and exterior surfaces in contact with the pumped liquid resistand against salt water and industrial sewage. Layer thickness 400µm, adhesion 15 N/mm2, solvents free.

Sewage pumps in dry sump installation (Picture5)
Impeller, sealing flange, pump casing and suction port are of special material and therefore protected against corrosive or abrasive sewage.
Motor with Ceram-coating against corrosion, cable with protection hose.